SABA Sealer Field - 7.5 liters

SABA Sealer Field is especially suitable for sealing horizontal joints and cracks in paving structures of (prefab) elements, including:

• airports
• (highway) roads
• parking facilities
• ports
• gas stations
• chemical plants
• emergency reservoirs
• industrial floors
• stadiums

Advantages

• permanently elastic
• jet blast resistant
• resistant to motor fuels such as petrol, diesel, kerosene and LPG
• resistant to defined solvents and chemicals
• contains no solvents
• UV stable
• sustainable, reference period of 20 years
• resistant to extreme climate/weather conditions
• CE marking based on EN 14188-2, class AD and ETA-07/0050

Processing
For processing and pre-treatment of the substrate, we refer you to the relevant application-oriented information sheets and pre-treatment tables.

Technical data

Part APart BBasic polysulfidean org. peroxideDensity (EN 542)approx. 1,720 kg/m3approx. 1,620 kg/m3Solid contentapprox. 100%approx. 100% Processing time (23 °C, 50% RH) approx. 2 hoursCuring time (23 °C, 50% RH) approx. 12 hoursHardness in Shore A (EN ISO 868) approx. 25Volume loss (EN ISO 10563)< 3%Max. permissible deformation (ISO 11600) approx. 25%Modulus at 100% elongation (EN ISO 8339) approx. 0.2 N/mm2 Tensile strength (Fmax) (EN ISO 8339) approx. 0.5 N/mm2Elongation at break (EN ISO 8339) approx. 300%Elastic recovery (EN ISO 7389) > 80%Processing temperature minimum + 5 °C to maximum + 35 °CStorage temperature minimum + 5 °C to maximum + 25 °CTemperature resistance minimum - 50 °C to maximum + 120 °C

Safety recommendation

For more information regarding safety, please refer to the relevant SABA safety information sheet.

1. Certification
 ETA 07/0050 for the liquid-tight sealing of surfaces for the storage, repackaging and filling of environmentally hazardous substances.

SABA Sealer Field has also been tested by the KIWA Polymer Institute and complies with FS S-SS 200E for airport application.

2. Chemical resistance

Meets the requirements of EN 14188-2 for the following groups: LC1

Gasoline for spark ignition engines, super and normal (according to EN 228:2004-03) with a maximum of 5 percent by volume of bio-alcohol

LC1a Gasoline for spark ignition engines, super and normal (according to EN 228:2004-03) with a maximum of 20 percent by volume of bio-alcoholLC2 Aviation fuelsLC3 Fuel oil EL (DIN 51603-1), unused combustion motor oil, unused automotive transmission oil, mixture of saturated and aromatic hydrocarbons with an aromatic content ≤ 20 wt% and a flash point > 55°CLC3a Diesel fuel (according to EN 590) with a maximum of 5 percent by volume of bio-alcoholLC3b Diesel fuel (according to EN 590) with a maximum of 20 percent by volume of bio-alcoholLC4 All hydrocarbons as well as mixtures containing benzene with max. 5 vol.% benzeneLC4aBenzene and benzene containing mixtures (incl. 4)LC4bCrude oilsLC4cUsed combustion motor oil and used automotive transmission oil with a flash point > 55°CLC5Mono- and polyfunctional alcohols (up to a maximum of 48 vol.% methanol), glycol ethersLC5aAll alcohols and glycol ethersLC5bSingle and polyfunctional alcoholsLC7All organic esters and ketonesLC7aAromatic esters and ketonesLC7bBio fuelLC9Aqueous solutions of organic acids (carboxylic) up to 10% as well their saltsLC10Mineral acids up to 20% as well as acidic hydrolyzed inorganic salts in aqueous solution (pH < 6), except for hydrofluoric acids and acids with an oxidizing effect and their saltsLC11Inorganic alkalis as well as alkaline, hydrolyzed inorganic salts in aqueous solution (pH > 8), except for ammonium solutions and solutions of salts with an oxidizing effect (eg hypochlorite)LC12Aqueous solutions of inorganic non-oxidizing salts with a pH-value between 6 and 8-Skydrol-Adblue, max. 35% urea in aqueous solution

PRODUCT SHEET

DECLARATION OF PERFORMANCE SABA SEALER FIELD

SAFETY DATA SHEET SABA SEALER FIELD (A)

SAFETY DATA SHEET SABA SEALER FIELD (B)